CAST-JAMMER SPECIFICATIONS

CAST-Jammer specifications and features.

Output Frequency:

 L1, L2 and L5

Maximum Dynamics

Velocity:  1000 m/s

Acceleration: +/- 150,000 m/s²

Jerk:+/- 150,000 m/s³

Signal Level

Jammer Signal Range: 173dB

Jammer Signal Level:  -203dBW to -30dBW

Signal Accuracy

Pseudorange: 1 mm

Pseudorange Rate: 1 mm/s

Delta Pseudorange: 1 mm

Interchannel Bias: < 1 mm

Uncontrolled Bias: < 1 mm

Bias Repeatability: (initial) < 1 mm

Bias Stability: (operational)< 1 mm

Modes of Operation

CW

Pulsed CW
Rate:  0.01Hz-100KHz

Swept CW
Rate:  0.01Hz-100KHz, Duty Cycle 1%-99%

Swept CW:  Sweep Types: Sinusoid, Triangle, Ramp Up/Down

Swept CW:  Bandwidth: 0.01Hz – 24 MHz

FM Noise:  Bandwidth: 0.00Hz – 20MHz

WB Noise: Bandwidth: 24MHz

Binary Phase Shift Key: Bandwidth 24MHz

System Features

Produces coherent interference signals for use in single and multi-element systems

Supports up to eight independently controlled jamming elements

Multiple Waveform types can be generated for each element

Jammer signals are transmitted commensurate with the GNSS signals that are assigned for each element

Interference Generators can be stationary or dynamic

Each jammer can be assigned an initial speed, altitude, and stationary or dynamic trajectory

Each interference source’s magnitude and type of modulation is operator selected

Supports operation in both canned and real-time modes of operation

Broadband Noise signals are optimized to deliver Gaussian amplitude distribution with adjustable power output levels

Interference scenarios are 100% repeatable to assure consistent results

Based on CAST proprietary FPGA technology that produces clean waveforms with very low phase noise