GNSS Down Under: Southern Positioning Augmentation Network (SouthPAN)

Blog

GNSS Down Under: Southern Positioning Augmentation Network (SouthPAN)

The Southern Positioning Augmentation Network (SouthPAN) is a partnership between the governments of Australia and New Zealand to improve GNSS positioning and navigation within the two countries’ exclusive economic areas. Already in initial operations, the system will be fully operational within the next few years.

This article will review SouthPAN’s architecture, the forces driving the system’s development, and the timeline for its availability.

How SouthPAN works

SouthPAN is a (SBAS) like Japan’s Quasi-Zenith Satellite System (QZSS), the EU’s European Geostationary Navigation Overlay Service (EGNOS), and America’s Wide Area Augmentation System (WAAS).

These systems use satellites in geostationary or geosynchronous orbits to broadcast correction signals that compatible GNSS receivers use to improve positioning, navigation, and timing accuracy.

Once fully operational, SouthPAN will correct signals from both the GPS and Galileo constellations across the land and maritime territories of the two partner countries. The SouthPAN architecture can be divided into four segments: ground, control, space, and user.

SouthPAN ground segment

A network of thirty-five precisely located GNSS Reference Stations (GRS) will collect signal data broadcast from GPS and Galileo satellites passing over Australia and New Zealand. Most of the sites will be in Australia and New Zealand, but the network will also include stations in South Africa, Vanuatu, Fiji, the Coco Islands, and Antarctica.

While the GRS network is under development, SouthPAN draws satellite signal data from the .

Two uplink sites, one each in Australia and New Zealand, will handle communications with satellites in SouthPAN’s space segment.

SouthPAN control segment

Correction Processing Facilities (CPF) will collect data from the GRS network to calculate errors that impact receiver performance, including satellite positioning and atmospheric effects.

Redundant Ground Control Centers (GCC) in Australia and New Zealand maintain the SouthPAN system and share information with the user community.

SouthPAN space segment

As with other SBAS architectures, SouthPAN does not need dedicated satellites to accomplish its mission. Instead, the uplink stations send the correction signals to an existing commercial geostationary satellite, which retransmits SouthPAN’s signals as a hosted service.

Inmarsat’s I-4 geostationary satellite constellation hosts the SouthPAN space segment during initial operations. From 2027, the space segment will migrate to Inmarsat’s latest-generation I-8 constellation.

SouthPAN user segment and services

Many existing receivers with positioning capabilities can already use SouthPAN to access SouthPAN’s three open services:

  • L1 SBAS – Augments the GPS L1 C/A signal.
  • Dual Frequency Multi-Constellation (DFMC) SBAS – Augments the GPS L1 C/A and L5 signals along with Galileo’s E1 and E5 signals.
  • Precise Point Positioning via SouthPAN (PVS) – Provides more accurate positioning than DFMC SBAS.

Aviation and other safety-of-life applications will not be available until SouthPAN reaches Final Operating Capability.

SouthPAN partners

SouthPAN is a project of Toitū Te Whenua Land Information New Zealand (LINZ) and Geoscience Australia (GA) with development and operational support from private sector partners, including Lockheed Martin Australia, GMV, and Inmarsat.

Lockheed is the program’s systems integrator. The company built the Block II and Block III satellites for the GPS constellation and developed the second-generation SBAS platform upon which SouthPAN is based.

GMV will build and manage SouthPAN’s ground segment. The Spanish company plays a similar role in the EGNOS system.

Inmarsat hosts SouthPAN’s space segment, providing communications services from its geostationary satellite constellations.

SouthPAN operational status

With Australia and New Zealand, traditional GNSS positioning accuracy ranges from five to ten meters. The fully operational SouthPAN service will improve GNSS accuracy to as little as ten centimeters. Moreover, this improvement will be available throughout SouthPAN’s coverage area, including in urban canyons, remote regions, and at sea.

SouthPAN activated its open service in 2022 using existing infrastructure to provide L1 SBAS. By early 2024, enough of SouthPAN’s architecture had been deployed to offer DFMC SBAS and improve availability from 95% to 99.5%. Availability will reach 99.9% in 2026.

Inmarsat’s I-8 satellites reach orbit in 2027. SouthPAN will start evaluating safety-of-life service, which is expected to be available in early 2028. That same year, a second Inmarsat satellite will begin broadcasting SouthPAN’s signals, and the service will reach Final Operating Capability.

Why Australia and New Zealand need SouthPAN

LINZ and GA launched a fifteen-month pilot project in 2017 to confirm SouthPAN’s potential performance. An independent analysis found that better positioning, navigation, and timing data could yield economic impacts of AUD 7.6 billion over three decades across varied industries, including:

  • Agriculture – Virtual fencing and will reduce feed, fertilizer, and pesticide waste.
  • Ground transportation – Improved and other driving automation systems will improve road safety. Rail networks can reduce maintenance costs through better geo-referencing.
  • Air transportation – More will let aircraft fly more efficient routes and conduct instrument-based approach operations than currently possible.

Today’s GNSS constellations already have unlocked tremendous benefits for agriculture, transportation, and other industries. By making GNSS positioning more accurate and reliable, Australia and New Zealand will enhance public safety and boost economic growth in the decades ahead.

May 21, 2025